Bulkhead, The contractor has begun to pour the concrete all…

The contractor has begun to pour the concrete all at the north end of the bridge. Due to the length of the walls on this bridge, the walls are poured in short segments of approximately 20 feet in length. This allows the contractor to pour one portion of wall while he’s still working on forming up the rest of the wall. It also ensures that the concrete in each segment is one continuous mass. If the wall was poured in one long segment the concrete at the bottom of the wall would begin to harden before the upper portion of the wall is poured, which would reduce the integrity of the wall. Bulkheads in the formwork are used to allow this segmented construction. A bulkhead is basically a piece of formwork perpendicular to the main wall formwork and allows the horizontal reinforcement in the wall pass through and tie into the next segment of the wall. Here a steel pile is used to brace the bulkhead from bowing out while the concrete is poured. The top of the pile is supported to the main formwork using a chain ratchet.

Foundation Repair Contractor

Wooden bulkhead repair with polyurethane foam - Prime Resins

Bulkhead BarrierBulkheads - AMICO - StayForm Concrete Forming

Concrete Cutting Cutter Lowell MA Mass Massachusetts

Using SCC to Battle Bug Holes Concrete Construction Magazine

Olmstead Locks and Dam Project - Concrete Equipment

Are there structural weaknesses in multi-pour concrete structures where the new concrete meets the original? - Quora

Bulkhead Steps - AJFoss

Bulkhead BarrierBulkheads - AMICO - StayForm Concrete Forming

How to Build a House Foundation

Rebuilding a Basement Bulkhead Entry